The Permit to Work Form provides a systematic disciplined approach to assessing and controlling the risks of a job when performing various high risk work.
This form covers hotwork, confined spaces, gas work, working at heights, excavation and electrical work.
It can be used for employees or contractors.
A SWMS can be generic – the Permit to Work Form is task specific and:
– specifies the work to be done and equipment used.
– specifies controls to reduce risk
– specifies when the work will start and finish
– can be used to advise other occupants in the area where works are to be done
– provides a checking mechanism that ensures that people and the immediate environment are clear and safe on completion.
Permit to Work Form
AUD$9.95
The Permit to Work Form provides a systematic disciplined approach to assessing and controlling the risks of a job when performing various high risk work.
This form covers hotwork, confined spaces, gas work, working at heights, excavation and electrical work.
It can be used for employees or contractors.
- The document/s I am purchasing must be used cautiously and must be modified to reflect the particular circumstances of use.
- The documents/s do not comprise legal or other professional advice.
- Whilst all care has been taken in the preparation of the document/s, no person should rely upon the document/s without first obtaining advice from a qualified professional and reviewing the document/s to ascertain if appropriate for the intended use.
- Recovery Partners does not warrant that the document/s I am purchasing are fit for any specific purposes, including without limitation compliance with any legal requirements that may be applicable to my organisation.
- Recovery Partners does not accept liability for any loss or damage arising from reliance on the contents of the document/s I am purchasing.
We can brand documents for you* (this is at an additional cost and 24 hours)