SWMS – Carpenter Fit Out and Fixing

iconJust want us to come in and do it all for you? GET A QUOTE

SWMS – Carpenter Fit Out and Fixing


Carpenter Fit Out and Fixing

  • Pre-Job Planning
  • Arrival on Site
  • JSA/Risk Assessment
  • Tools and Material Unloading
  • Work Area Set Up
  • Set up for Working at heights
  • Hand and Power Tools
  • Cutting of Materials
  • Using Hazardous Substances
  • Fitout and fixing
  • Site Clean Up and Pack Down
  • The document/s I am purchasing must be used cautiously and must be modified to reflect the particular circumstances of use.
  • The documents/s do not comprise legal or other professional advice.
  • Whilst all care has been taken in the preparation of the document/s, no person should rely upon the document/s without first obtaining advice from a qualified professional and reviewing the document/s to ascertain if appropriate for the intended use.
  • Recovery Partners does not warrant that the document/s I am purchasing are fit for any specific purposes, including without limitation compliance with any legal requirements that may be applicable to my organisation.
  • Recovery Partners does not accept liability for any loss or damage arising from reliance on the contents of the document/s I am purchasing.

General fit-out tasks including but not limited to installing doors, architraves and skirting boards. May also apply to lock-up tasks like eave sheet moulding and cladding.

We can brand documents for you* (this is at an additional cost and 24 hours)